电探针保护气体的优选原则

为了研究强冲击波作用下不同气体对电探针保护能力的差异,通过化爆加载实验分别观察了氦气、氩气和甲烷气体在不同冲击波强度下电探针电路的导通现象,实验发现冲击波马赫数在7.5～12.1范围内,氦气和甲烷气体均能有效地保护电探针,而氩气环境下的电探针电路产生提前导通现象。并用一维流体动力学理论分别计算了在相同的初始条件和3～8km/s范围内的六种不同飞片速度下氦气、氩气和甲烷的冲击状态参数。通过对这些状态参数和相关物性的分析,提出了电探针保护气体的优选原则。     

Vibration signal-based chatter identification for milling of thin-walled structure

In high speed milling aeronautical part, tool condition monitoring(TCM) is very important, because it is prone to get a chatter owing to the low stiffness of thin-walled structures. And the TCM is key technology for automated machining. In this paper, aiming to chatter monitoring in thin-walled structure milling, a variational mode decomposition – energy distribution(VMD-ED)method is proposed to improve the identification accuracy. And a moving average root mean square – mean value(MARMS-MV) ide...     

A review of friction stir joining of SiCp/Al composites

SiCp/Al composites have excellent comprehensive properties and have been widely used in aerospace, automotive industry and other fields. Due to the huge difference in performance between SiC particles and matrix alloys, traditional fusion welding methods are difficult to meet the join requirements of SiCp/Al composites. Friction stir joining (friction stir welding), as a solid phase joining process, has been proved to be a new technology with fine prospect in joining SiCp/Al composites compared with fusion welding process. Although some progress has been made in recent years, there are still full of challenges. In this paper, the research status of friction stir joining of SiCp/Al composites in recent years is expatiated, including the weldability of SiCp/Al composites, the macrostructure and the microstructure of joints, mechanical properties of joints, and tool wear and monitoring. Furthermore, the existing challenges of friction stir joining of SiCp/Al composites are summarized and the future development directions are prospected.     

Laser-induced oxidation assisted micro milling of high aspect ratio microgroove on WC-Co cemented carbide

Severe tool wear and poor surface quality are the main problems during micro machining of cemented carbide. In this work, an innovative hybrid process of laser-induced oxidation assisted micro milling (LOMM) was proposed to solve the problems. A nanosecond laser was utilized to induce oxidation of the WC-20%Co material, producing loose oxide which was easy to remove. The micro machinability of the material was improved by laser-induced oxidation. The oxidation mechanisms of cemented carbide were studied. A microgroove with a depth of 2.5 mm and aspect ratio of 5 was fabricated successfully. The milling force, surface quality and tool wear mechanisms were investigated. For comparison, a microgroove was also fabricated with conventional micro milling (COMM) using identical milling parameters. Results revealed that in LOMM the milling force and tool wear rate were extremely low during removing the oxide. The machined surface quality and dimensional accuracy achieved by LOMM were superior to those obtained by COMM. The surface roughness S_a of the microgroove bottom reached 88 nm in LOMM, while the cross-sectional geometry of the microgroove was a trapezoid. Perpendicularity of the microgroove sidewall machined by LOMM was better than that by COMM. The tool wear forms in LOMM were coating spalling and slight tool nose breakage. Compared with COMM, the tool life in LOMM was prolonged significantly. It indicates that the proposed hybrid process is an effective and efficient way to fabricate high aspect ratio micro-features with high dimensional accuracy.     

一种新型火星定点着陆轨迹快速优化方法

针对火星定点着陆任务大气进入段的轨迹规划问题,给出了一种基于hp Radau伪谱法的快速优化算法。综合考虑大气进入段的动力学约束、边值约束、以及着陆器的机动能力约束和安全性约束,结合hp Radau伪谱法的配点特性,将轨迹优化问题转换成一个大规模多约束参数优化问题,给出了大气进入段轨迹优化问题的求解框架;为了提高算法的计算效率,给出了参数优化过程中雅克比矩阵的解析表达式;并通过数学仿真对本文算法进行了数值验证,结果表明：     

带扰流柱内冷通道对表面气膜冷却特性的影响

为了讨论内冷通道结构对表面气膜冷却特性的影响,通过数值模拟的方法,计算研究不同结构下,冷气流过带有扰流柱内冷通道对表面气膜冷却特性的影响,并研究冷气通道与燃气掺混后的冷却效果;采用六种不同结构的扰流柱与气膜孔排列方式,计算中吹风比的范围为0．1〈M〈2．0。结果表明：冷气通道内的扰流柱对进入气膜孔的冷气起到稳定作用,比冷气通道内不加扰流柱的气膜冷却效果好,而且扰流柱与气膜孔不同的排列方式对气膜冷却效果有显著影响,因此选择合适的排列方式有利于气膜冷却。     

发动机高压两级涡轮盘联合低循环疲劳寿命试验

以某型发动机高压两级涡轮盘为研究对象,通过有限元计算得到试验载荷系数,组装和调试了全尺寸联合试验件,完成了低循环疲劳试验,得到了以传动臂销钉孔为定寿部位的两级涡轮盘低循环疲劳寿命。两级涡轮盘联合低循环疲劳试验在国内尚属首次,相对于单盘低循环疲劳试验,更加符合发动机实际工作状态,将传动臂销钉孔作为两级涡轮盘的定寿部位更为合理。该联合试验为外场涡轮盘重新定寿提供了依据。     

微小刀具同轴全息对刀方法研究

针对现有对刀方法存在的各种不足,提出了一种微小刀具的同轴全息对刀方法。在对全息成像原理和全息图像关键问题进行研究与分析的基础上,搭建了一套微细铣刀的全息对刀检测装置,并利用标准刀具在五轴加工中心进行了微细铣刀的对刀测量试验。试验结果表明:该对刀装置能够高效地进行微细铣刀的对刀检测,系统相对检测精度达5.1μm。在相同检测条件下,与高精度机外预调仪的测量结果相比,接触式对刀仪的相对误差为0.033%,而全息对刀样机的相对误差为0.007%,后者更能有效地实现微小刀具的对刀检测。该结果验证了微小刀具的同轴全息对刀方法的可行性,即全息测量可用于微细铣刀的高精度对刀。     

刀形检测系统及空间测量坐标系的建立

论述一种基于二维视觉的刀形检测及调位系统,给出了测量系统的机械结构以及刀具 原理,分析了系统测量坐标系建立的原理和方法,并给出相关的实验数据。系统的研制实现了高效、精确、自动的刀形检测和位置调整,为高精度数控加工提供了保障。     

复合材料层板多钉机械连接强度计算方法

提出了一种适于设计计算使用的复合材料层板多钉机械连接强度分析方法。该方法将复合材料板多钉机械连接强度分析问题化为求解各向异性体弹性理论中的复势函数边值问题,以Faber级数和最小二乘边界配置技术为工具导出了孔边应力的级数解表达式。选用的孔边特征曲线上的点应力失效判据避开了孔边接触、材料非线性、大位移、刚度减缩等复杂且难以验证的强度模拟计算过程。计算结果与试验结果符合较好。还详细探讨了铺层比例、排距等设计参数对钉载分配、挤压强度的影响规律。